AIRCOMMANDER – Spray Air Treatment for Painting Processes

The AIRCOMMANDER from SEHON ensures better surfaces, lower paint consumption, higher throughput, and significantly less finishing work.

It enables a significant quality leap in the application process of automatic and manual painting and surface technology. The AIRCOMMANDER cleans and heats the compressed air continuously. The compressed air can be adjusted to the ideal processing temperature. Perfect ionization occurs directly and highly efficiently via the included ionization gun. Through ionization and heating, paints atomize much finer and can be processed without problems.

AIRCOMMANDER – The Advantages

• Better, finer atomization of the paint
• Better surfaces, less dust and dirt
• Softer leveling of the paint
• Less paint consumption
• Significantly less overspray
• Fewer filter changes
• Shorter painting cycle times and higher throughput
• Drastic reduction of rejects or rework (finish)
• Funktioniert bei HVLP-Pistolen genauso gut wie bei AirMix-Pistolen
• Better penetration into recesses and fewer dirt inclusions in automotive painting
• Effect on topcoat and clearcoat (automotive painting)
• Painters do not need to change their usual working methods
• The device is connected to a standard power supply/socket with 230 V (no three-phase power required)
• Low power consumption through demand-based, automatic control of energy supply during heating (no continuous load operation required)
• Patented hose package for continuous, safe, and explosion-protected heat supply to the compressed air
• Intuitive high-end touch panel Siemens SIMATIC HMI for operation and control

Manufacturer’s stated savings

• Reduction in finishing costs by approximately 20% to 40%
• Reduction in flash-off and drying times by approximately 10% to 30%
• Reduction in base coat consumption by approximately 20% to 30%
• Reduction in conventional clear coat consumption by approximately 10% to 15%

Technical Data

Mechanical Data:
Dimensions: (W × H × D) 600 x 1610 x 500 mm
Weight: 160 kg
Electrical Data:
Operating voltage: 230 V, 16 A
Control voltage: DC24 V
Rated current: 9.5 A
Power consumption: 2.2 kW
Mains fuse on site: Max. 16A
Compressed Air Supply:
Air pressure: Min. 6 bar – Max. 8 bar
Air quality: ISO 8573.1
Particle size and concentration: Class 1
Pressure dew point: Class 4
Oil content: Class 1
Intended Ambient Conditions:
Room temperature: Min. 15°C to Max. 35 °C
Humidity: Max. 40%
Emissions:
Noise (sound pressure): Max. 80 dB (A)
EMC in accordance with the EMC Directive and the
EMC standards for industrial use
Paint Air Hose: Heated, length 12 m
Application Area: Wet paints